Follow
Hadi Noori
Title
Cited by
Year
Design, Manufacturing, and Experiments of Additive Manufactured Stiffened Thin-walled Plates
AF Leicht, MA Mahdi, K McNamara, H Noori, W Zhao
AIAA SCITECH 2024 Forum, 2077, 2024
2024
Microwave-assisted fracture toughness improvement in additively manufactured polylactic acid–copper composite
N Haque, MY Azarfam, H Noori
Journal of Materials Science 56, 11298-11308, 2021
12021
Effect of Counter-Gravity 3D Printing on PLA Interlayer Fracture Energy
H Noori, CC Lytle
TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings, 249-255, 2020
2020
Interlayer fracture energy of 3D-printed PLA material
H Noori
The International Journal of Advanced Manufacturing Technology 101, 1959-1965, 2019
212019
Effect of deformation rate on post-forming interfacial delamination in polymer laminated sheet metals
H Noori, M Jain, K Nielsen
The Journal of Adhesion, 2019
2019
Delamination in deformed polymer laminated sheet metals
H Noori, M Jain, K Nielsen, F Brandys
International Journal of Adhesion and Adhesives 85, 219-224, 2018
152018
Effect of deformation-induced residual stress on peel strength of polymer laminated sheet metal
H Noori, M Jain, K Nielsen, F Brandys
The Journal of Adhesion 92 (10), 862-876, 2016
82016
Significance of peel test speed on interface strength in cohesive zone modeling
H Noori, M Jain, K Nielsen, F Brandys
The Journal of Adhesion 92 (1), 39-51, 2016
92016
Influence of metallic substrate surface engineering on peel resistance of adhesively bonded polymer film
H Noori, M Jain, K Nielsen, F Brandys
Journal of Adhesion Science and Technology 29 (13), 1403-1413, 2015
72015
ASSESSMENT OF INTERFACIAL ADHESION IN POLYMER LAMINATED SHEET METALS
H Noori
2015
Calculation of forming limit diagrams using Hill's 1993 yield criterion
A Rezaee-Bazzaz, H Noori, R Mahmudi
International Journal of Mechanical Sciences 53 (4), 262-270, 2011
332011
Effect of isothermal aging on room temperature impression creep of lead free Sn–9Zn and Sn–8Zn–3Bi solders
R Mahmudi, AR Geranmayeh, H Noori, H Khanbareh, N Jahangiri
Materials Science and Technology 26 (8), 1001-1007, 2010
52010
A comparison of impression, indentation and impression-relaxation creep of lead-free Sn–9Zn and Sn–8Zn–3Bi solders at room temperature
R Mahmudi, AR Geranmayeh, H Noori, H Khanbareh, N Jahangiri
Journal of Materials Science: Materials in Electronics 20, 312-318, 2009
182009
Effects of Ag and Al additions on the structure and creep properties of Sn-9Zn solder alloy
R Mahmudi, AR Geranmayeh, H Noori, M Taghaddosi
Journal of electronic materials 38, 330-337, 2009
152009
Impression creep of hypoeutectic Sn–Zn lead-free solder alloys
R Mahmudi, AR Geranmayeh, H Noori, M Shahabi
Materials Science and Engineering: A 491 (1-2), 110-116, 2008
542008
Effect of cooling rate on the room-temperature impression: creep of lead-free Sn–9Zn and Sn–8Zn–3Bi solders
R Mahmudi, AR Geranmayeh, H Noori, N Jahangiri, H Khanbareh
Materials Science and Engineering: A 487 (1-2), 20-25, 2008
432008
Creep of dilute tin based lead free solder alloys as replacements of Sn–Pb solders
R Mahmudi, AR Geranmayeh, H Noori, G Nayyeri, F Pishbin
Materials Science and Technology 24 (7), 803-808, 2008
102008
Prediction of forming limit diagrams in sheet metals using different yield criteria
H Noori, R Mahmudi
Metallurgical and Materials Transactions A 38, 2040-2052, 2007
592007
The system can't perform the operation now. Try again later.
Articles 1–18